Physical properties
| Melt flow index | 1.8 g/10min | 230°C/2.16kg | ASTM D1238 / ISO 1133 |
|---|
| Density | 0.9 g/cm³ | | ASTM D792 / ISO 1183 |
|---|
| Water absorption | 0.02 % | | ASTM D570 / ISO 62 |
|---|
Mechanical properties
| Tensile strength | 29 MPa | | ASTM D638 / ISO 527 |
|---|
| Elongation at break | 300 % | | ASTM D638 / ISO 527 |
|---|
| Flexural modulus | 1100 MPa | | ASTM D790 / ISO 178 |
|---|
| Flexural strength | 28 MPa | | ASTM D790 / ISO 178 |
|---|
| Izod impact, notched | 8 kJ/m² | | ASTM D256 / ISO 180 |
|---|
| Charpy impact | 9 kJ/m² | | ISO 179 |
|---|
| Hardness | R 85 | | ASTM D785 |
|---|
Thermal properties
| HDT (0.45 MPa) | 88 °C | | ASTM D648 / ISO 75 |
|---|
| Vicat softening point | 135 °C | | ASTM D1525 / ISO 306 |
|---|
| Melting point | 158 °C | | ISO 11357 |
|---|
Optical properties
| Transmittance | 91 % | | ASTM D1003 |
|---|
| Haze | 9 % | | ASTM D1003 |
|---|
| Gloss | 90 | | ASTM D523 |
|---|
Datasheet values are compiled from manufacturer data sheets and third-party test reports, for reference only and without warranty of any kind. Please request the official TDS/COA from the manufacturer and test sufficiently before material selection. The COA of the shipped lot prevails.. Note: MFR test conditions may differ between grades and manufacturers, so MFR values are not directly comparable.